How-To

Rider kneeling to repair a side-by-side tire on the trail

From Flat To Fixed

Quick Tips for Easy and Effective Tire Repairs

New to off-road tire repair? Our Off-Road Tire Repair Guide covers the three most common types of tire damage, what repair gear to carry, and how to prepare for unexpected tire problems on the trail.

View Tire Repair Guide

GlueTread sidewall patch instructions: prep the surface, apply adhesive into the cut, then measure and trace the patch

GlueTread Instructions

Click below for access to our most up-to-date instructions

View PDF

Man kneeling to repair the rear tire of a white GlueTread pickup truck

Detailed How-To Video

SIDEWALL REPAIR

Animation: sanding the damaged sidewall smooth before patching

Prep the surface

Sand the damaged area to create a smooth surface, ensuring no lettering, raised areas, or lugs remain where the patch will be applied.

Pressing the edges of a tire cut together after applying GlueTread adhesive

Apply adhesive

Keep the cut edges pressed together for one minute while the adhesive sets. Once it's dry, lightly sand the area to smooth out any excess adhesive.

Animation: measuring a patch against the damage, marking it and cutting it to fit

Measure, Mark, and Cut the Patch

Use a patch large enough to cover the damaged area, ensuring at least 1/2" of overlap around the puncture or damage. Mark the size on the patch and cut it to fit.

Animation: applying adhesive in a dot pattern and setting the patch in place

Apply adhesive in dot pattern

Apply adhesive in a dot pattern on either the patch or the tire, following the glue pattern outlined in the instructions. Immediately set the patch in place and apply pressure to secure it.

Animation: pressing the patch firmly so the corners and edges adhere

Apply pressure and allow to cure for 10 minutes

Apply even pressure to the patch for 3 minutes, ensuring that the corners and edges are fully adhered. Then, let the patch cure for a full 10 minutes to ensure a solid bond.

Animation: inflating the repaired tire and checking for leaks

Inflate, Check for Leaks, and Ride!

Inflate the tire and check for any leaks. If a leak is detected, deflate the tire and add more adhesive as needed. Once sealed, inflate again and you're good to go!